76%

Protection Circuit Module (PCB) for 14.8V Li-Ion Battery Pack (10A limit) with Fuel Gauge Socket

Original price was: $12.99.Current price is: $3.12.

SKU: PCB-S4A10L-GS Category:
Protection Circuit Board Specifications For 4S 14.4V/14.8V Li-ion/Li-po Battery Pack
Model: PCB-S4A10L-GS
No. Test item Criterion
1 Voltage Charging voltage DC: 16.8V CC/CV (4.2V/cell)
Balance voltage for single cell N/A
2 Current Balance current for single cell N/A
Current consumption for single cell ≤50μA
Maximal continuous Charging current 7A
Maximal continuous discharging current 7A
3 Over charge Protection
(single cell)
Over charge detection voltage 4.35±0.05V
Over charge detection delay time 0.5S-2S
Over charge release voltage 4.15±0.1V
4 Over discharge protection
(single cell)
Over discharge detection voltage 2.40±0.1V
Over discharge detection delay time 500-1500mS
Over discharge release voltage 3.0±0.1V
5 Over current protection Over current detection voltage N/A
Over current detection current (For discharge only) 12±3A
Detection delay time 50ms-150ms
Release condition Cut load, auto recover
6 Short protection Detection condition Exterior short circuit
Detection delay time 200-800us
Release condition Cut load, auto recover
7 Resistance Protection circuitry (B- TO P-) ≤50mΩ
8 Temperature Operating Temperature Range -40 to +85℃
Storage Temperature Range -40 to +125℃
9 Weight 1 Oz
10 Dimenstion LxWxT 100 x 16 x 3.5-4.0 mm
11 Specification in pdf file Download the specification

For other PCM/PCB, please check our PCM/PCB/BMS/CMB/UPS category

Warning

  • If you want to use this protection circuit board for a battery that is less than the rated drain, you must add additional protection device to protect the battery itself. Such as: proper rated polyswitch.
  • You must be professional in Lithium battery pack to buy the protection circuit board. Misusing may cause battery damage or explode.We are not responsible for any damage caused by user.

Reviews

There are no reviews yet.

Be the first to review “Protection Circuit Module (PCB) for 14.8V Li-Ion Battery Pack (10A limit) with Fuel Gauge Socket”

Your email address will not be published. Required fields are marked *